Diagnose and configure modules on your Ford Focus 2 and C-Max I with ease. Using an ELM327 or ELS27 interface, connect to your vehicle's CAN-bus and access a range of functionalities for various modules.

Supported Modules and Features

Engine Control Unit (ECU): Access module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM) for ESU-411/418 (1.8 125/2.0 145), SIM28/29 (1.4 80/1.6 100/115), and ESU-121/131 (1.8 120/2.0 145) engines.

Instrument Cluster (Dashboard): Retrieve module information, read and clear DTCs, configure settings, reboot the module, adjust odometer readings, and perform odometer correction*.

Brake Control Module (BCM): Access module information, read and clear DTCs, configure settings, reboot the module, reset Dynamic Stability System (DDS) calibration, and perform brake bleeding*.

Body Control Module (BCM): Access module information, read and clear DTCs, configure settings*, and reboot the module.

Central Gateway Module (CGM) / Restraint Control Module (RCM): Access module information, read and clear DTCs, configure settings, reboot the module, and clear crash data*.

Transmission Control Module (TCM): Access module information, read and clear DTCs, and reset KAM*.

Climate Control Module (CCM): Access module information, read and clear DTCs.

Audio Control Module: Access module information, read and clear DTCs, and retrieve the radio code (for M-series)*.

*Some features require the full version of the application.

ELM327 Modification and ELS27 Information

To unlock full access to more modules, consider modifying your ELM327 adapter. Instructions can be found here: Http://forffclub.narod.ru/index/0-2

Alternatively, purchase an ELS27 interface from: https://els27.ru/. For ELS27USB, set the baud rate to 38400; for ELS27BT-2, use the ELS27 Baudrate utility to set it to 2,000,000.